Nissan Micra K11 Rear Trailing Arms - Non-Adjustable

Designed and manufactured by GizFab, our Nissan Micra K11 Rear Trailing Arm Set provides a complete non-adjustable replacement for the four rear suspension arms.

Manufactured from steel and supplied with polyurethane bushes, these arms are ideal for replacing tired, corroded or worn original components while providing more positive suspension location and improved feedback.

Unlike our adjustable rear arm options, these retain a fixed-length design, making them ideal for customers who don't require additional rear suspension geometry adjustment.

Key Features

• Designed & Manufactured by GizFab
• Complete Set of 4 Rear Arms
• Fixed-Length, Non-Adjustable Design
• Polyurethane Bushed
• Improved Rear Suspension Feedback
• Replaces Ageing Original Rear Arms
• Integrated Handbrake Cable Brackets
• Powder-Coated Finish
• Supplied Ready for Installation
• 12-Month Warranty

Complete Set of Four Arms

This kit is supplied as a complete set of four rear suspension arms, allowing the corresponding original components to be replaced together rather than upgrading individual arms.

This is particularly useful on older K11s where the original arms, bushes and surrounding components may have seen decades of road use.

Non-Adjustable Design

These arms use a fixed-length design.

They are intended for customers who want a straightforward replacement and upgrade without the additional adjustment offered by our adjustable rear suspension arms.

There are no threaded adjusters to set, maintain or periodically inspect.

For vehicles where additional geometry correction or adjustment is required, our Adjustable Rear Trailing Arm Set may be the more appropriate option.

Polyurethane Bushed

Each arm is supplied with polyurethane bushes.

Compared with soft or deteriorated original rubber bushes, polyurethane reduces unwanted compliance within the suspension mounting points, helping provide more positive suspension location.

Potential benefits include:

• Improved Rear Suspension Feedback
• More Positive Axle Location
• Reduced Unwanted Bush Movement
• More Consistent Suspension Behaviour
• Improved Response During Direction Changes

Some additional Noise, Vibration and Harshness (NVH) may be transmitted into the vehicle compared with original rubber bushes. This is a normal characteristic of uprated polyurethane suspension components.

Handbrake Cable Brackets Included

The arms incorporate the required handbrake cable mounting brackets, allowing the cables to be correctly supported and routed rather than being left unsecured after installation.

Correct cable routing and clearance should always be checked once the suspension has been reassembled.

Powder-Coated Finish

Each arm is supplied with a durable powder-coated finish to provide protection against the conditions encountered underneath the vehicle.

As with any underbody suspension component, periodic inspection and maintenance are recommended.

Stone chips or other damage to the coating should be addressed before corrosion is allowed to develop underneath the damaged area.

Professional Installation Recommended

Suspension components are safety-critical and should be installed by a suitably qualified technician.

Before installation, the surrounding mounting points and chassis should be inspected for:

• Corrosion
• Cracking
• Damaged Mounting Hardware
• Distorted Mounting Points
• Accident Damage
• Previous Chassis Repairs

All suspension hardware should be tightened correctly using appropriate procedures.

Following installation, we recommend having the vehicle's rear suspension geometry checked to ensure everything is correctly positioned and operating as intended.

Important Information

These are non-adjustable suspension arms.

They should not be confused with adjustable arms designed to provide additional suspension geometry correction or tuning.

If your vehicle has been substantially lowered or modified and requires correction of rear suspension geometry, additional adjustable suspension components may be required.

12-Month Warranty*

This product is warranted to the original purchaser against defects in materials and workmanship for a period of 12 months from purchase.

Our obligation under this warranty is limited to repair or replacement, at our discretion, where inspection confirms a manufacturing or material defect.

The warranty does not cover normal wear or deterioration of polyurethane bushes, cosmetic deterioration, corrosion resulting from coating damage or inadequate maintenance, incorrect installation, modification, accident or impact damage, misuse or damage resulting from defective or damaged surrounding chassis or suspension components.

GizFab Motorsport Developments is an independent aftermarket manufacturer and is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd.