Nissan Micra K10 & K11 Rear Trailing Arm Bolt Set

A complete replacement rear trailing arm nut and bolt set suitable for both the Nissan Micra K10 and K11.

Anyone who has removed the rear trailing arms from an older Micra will know how easily the original bolts can become seized inside the bush crush tubes, often making what should be a straightforward suspension job considerably more difficult.

If you're replacing trailing arms or bushes, be prepared before taking the car apart with a complete set of replacement hardware ready to go.

Key Features

• Suitable for Nissan Micra K10 & K11
• Replacement Rear Trailing Arm Hardware
• Correct Tensile Grade for the Application
• Zinc-Plated Finish for Corrosion Resistance
• Replacement Bolts, Nuts & Washers
• Ideal When Replacing Rear Trailing Arms or Bushes
• Saves Reusing Old, Corroded or Damaged Hardware

Be Prepared for Seized Original Bolts

The original trailing arm bolts on the K10 and K11 commonly suffer from corrosion over the years.

In particular, the bolt can seize inside the metal crush tube within the suspension bush.

When this happens, removal can require considerably more persuasion than expected and, in some cases, the original bolt may need to be cut or otherwise destroyed to remove the trailing arm.

Having replacement hardware ready before starting the job means you aren't left with the vehicle dismantled while trying to source the correct bolts afterwards.

Ideal for Trailing Arm Replacement

We recommend considering a new bolt set whenever carrying out work involving:

• Rear Trailing Arm Replacement
• Polyurethane Bush Installation
• Rear Suspension Restoration
• Adjustable Trailing Arm Installation
• Non-Adjustable Replacement Arm Installation
• Complete Rear Suspension Overhauls

Even where the original bolts can be removed successfully, heavily corroded, damaged or worn suspension hardware should not simply be reused.

Zinc-Plated Hardware

The replacement hardware features a zinc-plated finish to provide additional corrosion resistance in the exposed underbody environment.

The bolts are supplied in the correct tensile specification for their intended suspension application.

Professional Installation Recommended

Suspension components are safety-critical and should be installed by a suitably qualified professional.

Before installation, inspect the trailing arms, bushes, mounting points and surrounding chassis for corrosion, cracking or damage.

All hardware must be correctly installed and tightened to the appropriate specification.

GizFab Motorsport Developments is an independent aftermarket supplier and is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd.