Nissan Micra K13 Rear Axle Uprated Rubber Bush Set

Refresh the rear suspension of your Nissan Micra K13 with this uprated rubber rear axle bush set.

Supplied as a 2-piece set, these bushes replace the original rear axle / torsion beam mounting bushes, helping restore positive axle location and reduce unwanted movement from ageing factory rubber components.

An ideal replacement for worn original bushes and a worthwhile upgrade for standard, lowered and fast-road K13s.

Key Features

• Designed for the Nissan Micra K13
• Rear Axle / Torsion Beam Bushes
• 2-Piece Complete Set
• Uprated Rubber Construction
• Replaces Ageing OEM Rubber Bushes
• Improved Rear Axle Location
• Helps Reduce Unwanted Suspension Movement
• More Positive & Consistent Rear Suspension Response
• Road-Friendly Alternative to Solid Bushes
• Suitable for Standard & Modified Vehicles
• Reference: 7406

Complete 2-Piece Set

The kit contains:

• 2x Uprated Rubber Rear Axle Bushes

Providing the replacement bushes required for both sides of the K13 rear axle / torsion beam mounting arrangement.

Replacing both bushes together helps ensure the rear suspension is operating with components of the same age and specification.

Why Replace the Rear Axle Bushes?

The rear axle bushes locate the torsion beam relative to the chassis while allowing the controlled movement required as the suspension operates.

Over time, the original rubber can deteriorate through age, mileage and repeated suspension movement.

Worn bushes may become:

• Cracked
• Perished
• Torn
• Excessively Soft
• Separated from their Sleeves
• Excessively Compliant

This can allow the rear axle to move more than intended during cornering, braking and changes in load.

Depending on the condition of the existing bushes, symptoms can include knocking, vague rear suspension behaviour or generally less consistent handling.

Uprated Rubber Construction

These replacement bushes use an uprated rubber construction, providing firmer control of the rear axle while retaining the compliance associated with a rubber-bushed suspension system.

This makes them particularly suitable for road and fast-road vehicles where improved suspension control is wanted without moving to a significantly harsher solid or spherical mounting arrangement.

Ideal for:

• Daily Drivers
• Fast-Road K13s
• Lowered Vehicles
• Performance Builds
• Suspension Restorations
• Occasional Track Use

Some increase in suspension feedback may be noticeable compared with soft or heavily worn original bushes.

Ideal for Lowered & Modified K13s

Lowered suspension, performance tyres and increased cornering loads can place additional demands on the rear axle bushes.

Reducing unwanted compliance at the axle mounting points can help provide more consistent rear suspension behaviour as loads change.

For the best results, the condition of the complete rear suspension should be considered rather than replacing individual components in isolation.

Installation

Rear axle bushes are safety-critical suspension components and professional installation is recommended.

Removal of the original bushes and installation of the replacements may require suitable pressing or specialist bush installation equipment.

The rear axle must be correctly supported during removal and installation.

During installation, inspect:

• Rear Axle / Torsion Beam
• Chassis Mounting Points
• Mounting Hardware
• Brake Hoses & Pipes
• ABS Wiring
• Rear Dampers
• Rear Springs
• Surrounding Structure

Any significant corrosion, cracking, deformation or damaged mounting points should be addressed before the vehicle is returned to use.

Correct Installation Position

The bushes must be installed in the correct orientation where applicable.

Where the bush design requires final tightening with the suspension at its normal operating position, the appropriate procedure should be followed to avoid introducing unnecessary preload into the rubber.

Alignment / Geometry Check Recommended

Following major rear suspension work, we recommend checking the vehicle's wheel alignment and rear suspension geometry.

Although the K13 torsion beam provides limited factory adjustment, a geometry check can help identify axle misalignment, accident damage or other suspension problems.

What's Included?

• 2x Uprated Rubber Rear Axle / Torsion Beam Bushes

Supplied as one complete set for the vehicle.

Rear axle, mounting bolts and other suspension components are not included unless specifically stated.

Compatibility

Designed for applicable:

Nissan Micra / March K13 - Rear Axle / Torsion Beam

Supplier Reference: 7406 Rear Frame Bushing

Please confirm compatibility on imported, converted or unusually specified vehicles before ordering.

Manufacturer Warranty

This product is supplied subject to the applicable manufacturer's warranty terms and conditions.

Suspension bushes are service components and warranty does not normally cover normal wear, incorrect installation, contamination, accident damage, damaged mounting points or use outside the intended application.

GizFab Motorsport Developments is an independent aftermarket retailer and is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd. Nissan, Micra and March names are used solely for vehicle identification and compatibility purposes.