Nissan Micra K13 Front Wishbone Uprated Rubber Bush Set

Refresh and upgrade the front suspension of your Nissan Micra K13 with this complete uprated rubber front wishbone bush set.

Supplied as a 4-piece set, these bushes replace the original rubber bushes within both front lower control arms / wishbones, helping restore more positive suspension location and reduce unwanted movement from ageing factory components.

An ideal replacement for worn original bushes and a worthwhile upgrade for standard, lowered and fast-road K13s.

Key Features

• Designed for the Nissan Micra K13
• Front Lower Control Arm / Wishbone Bushes
• Complete 4-Piece Set
• Uprated Rubber Construction
• Replaces Ageing OEM Rubber Bushes
• Improved Lower Arm Location
• Helps Reduce Unwanted Suspension Movement
• More Positive Steering & Suspension Response
• Road-Friendly Alternative to Solid / Spherical Bushes
• Suitable for Standard & Modified Vehicles
• Ideal for Suspension Restoration & Performance Builds
• Reference: Q0455

Complete 4-Piece Front Wishbone Bush Set

This kit contains 4 uprated rubber bushes, providing the replacement wishbone bushes for both sides of the front suspension.

Replacing the bushes as a complete set helps ensure both front lower control arms are operating with components of the same condition and specification.

What's Included?

• 4x Uprated Rubber Front Wishbone / Lower Control Arm Bushes

Supplied as one complete vehicle set.

Wishbones, ball joints and mounting hardware are not included unless specifically stated.

Why Replace the Original Wishbone Bushes?

The front wishbone bushes locate the lower control arms while allowing the controlled movement required as the suspension travels.

They are subjected to considerable loads during:

• Braking
• Acceleration
• Cornering
• Steering Inputs
• Uneven Road Surfaces

As the original rubber deteriorates, the wishbone can move more than intended relative to the chassis.

Worn bushes may become:

• Cracked
• Perished
• Torn
• Excessively Soft
• Separated from their Sleeves
• Excessively Compliant

Depending on their condition, this can contribute to vague steering, unwanted suspension movement, knocking and inconsistent wheel alignment under load.

Uprated Rubber Construction

These bushes use an uprated rubber construction, providing firmer suspension location while retaining the compliance of a conventional rubber-bushed suspension system.

This makes them a good middle ground for customers wanting improved suspension response without moving to more aggressive solid or spherical-bearing suspension components.

They're particularly well suited to:

• Daily Drivers
• Fast-Road K13s
• Lowered Vehicles
• Performance Builds
• Suspension Restorations
• Occasional Track Use

Some additional suspension feedback may be noticeable compared with soft or heavily worn original bushes.

Useful Upgrade for Lowered K13s

Lowering the vehicle and fitting performance tyres can increase the loads transmitted through the front suspension bushes.

Reducing unwanted movement at the wishbone mounting points can help maintain more consistent suspension geometry as the vehicle accelerates, brakes and corners.

These bushes work particularly well as part of a wider suspension refresh alongside components such as:

• Coilovers or Lowering Springs
• Uprated Dampers
• Adjustable Anti-Roll Bar Links
• Anti-Roll Bar Components
• Chassis Bracing
• Performance Tyres
• Correct Wheel Alignment

Installation

Front wishbone bushes are safety-critical suspension components and professional installation is recommended.

Removal of the original bushes and installation of the replacements may require suitable pressing or specialist bush installation equipment.

During installation, inspect:

• Front Wishbones / Lower Control Arms
• Ball Joints
• Mounting Bolts
• Chassis / Subframe Mounting Points
• Bush Housings
• Anti-Roll Bar Components
• Steering Components
• Surrounding Suspension Components

Any significant corrosion, cracking, deformation or damage should be addressed before the vehicle is returned to use.

Correct Bush Orientation

The bushes must be installed in the correct orientation where applicable.

Where the bush design requires final tightening with the suspension at its normal operating ride height, the appropriate procedure should be followed to prevent unnecessary preload being introduced into the rubber.

Wheel Alignment Recommended

Following replacement of the front wishbone bushes, we strongly recommend carrying out a professional wheel alignment.

Replacing worn bushes can alter the resting position of the suspension compared with the previous deteriorated components, so alignment should be checked before returning the vehicle to normal use.

Compatibility

Designed for applicable:

Nissan Micra / March K13 - Front Lower Control Arms / Wishbones

Supplier Reference: Q0455 Front Lower Arm Bush

Please confirm compatibility on imported, converted or unusually specified vehicles before ordering.

Manufacturer Warranty

This product is supplied subject to the applicable manufacturer's warranty terms and conditions.

Suspension bushes are service components and warranty does not normally cover normal wear, incorrect installation, contamination, accident damage, damaged wishbones or mounting points, or use outside the intended application.

GizFab Motorsport Developments is an independent aftermarket retailer and is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd. Nissan, Micra and March names are used solely for vehicle identification and compatibility purposes.