Nissan Micra K12 Front Lower Arm Rear Uprated Rubber Bush Set

Refresh the front suspension of your Nissan Micra K12 with this uprated rubber front lower arm rear bush set.

Supplied as a 2-piece set, these bushes replace the original rear-position bushes within the front lower control arms / wishbones, helping restore more positive suspension location and reduce unwanted movement from ageing factory rubber components.

An ideal replacement for worn original bushes and a useful upgrade for standard, lowered and fast-road K12s.

Key Features

• Designed for the Nissan Micra K12
• Front Lower Arm Rear-Position Bushes
• 2-Piece Set
• Uprated Rubber Construction
• Replaces Ageing OEM Rubber Bushes
• Improved Lower Arm Location
• Helps Reduce Unwanted Suspension Movement
• More Positive Steering & Suspension Response
• Road-Friendly Alternative to Solid / Spherical Mounting
• Suitable for Standard & Modified Vehicles
• Reference: Q0952

⚠️ Front Lower Arm - REAR Bushes

This listing is specifically for the rear-position bushes of the FRONT lower control arms.

It does not refer to bushes for the rear suspension.

For the corresponding front-position / inner lower arm bushes, see our Q0951 Lower Arm Bushing Set.

What's Included?

• 2x Front Lower Arm Rear Uprated Rubber Bushes

One bush is supplied for each side of the vehicle.

Other lower control arm bushes, ball joints, control arms and mounting hardware are not included unless specifically stated.

Why Replace the Original Bushes?

The rear lower arm bush plays an important role in controlling the position and movement of the front lower control arm.

During acceleration, braking and cornering, significant loads are transferred through these bushes.

As the original rubber ages, it can become:

• Cracked
• Perished
• Torn
• Excessively Soft
• Separated from its Sleeve
• Excessively Compliant

This can allow the lower control arm to move more than intended under load, contributing to vague steering, inconsistent suspension behaviour and unwanted movement.

Replacing deteriorated bushes helps restore more controlled suspension location.

Uprated Rubber Construction

These bushes use an uprated rubber construction, providing firmer control of the lower arm while retaining the compliance associated with a rubber suspension bush.

This makes them particularly suitable for customers wanting improved suspension response without moving to the additional noise, vibration and harshness associated with more aggressive solid or spherical-bearing components.

Ideal for:

• Daily Drivers
• Fast-Road K12s
• Lowered Vehicles
• Performance Builds
• Suspension Restorations
• Occasional Track Use

Some additional suspension feedback may be noticeable compared with soft or heavily worn original bushes.

Ideal for Lowered & Modified K12s

Lowered suspension, performance tyres and increased cornering loads can place greater demands on the lower control arm bushes.

Reducing unwanted compliance can help the suspension maintain more consistent geometry as loads change.

For the best results, the condition of the complete lower control arm and surrounding suspension should be considered rather than treating each bush in isolation.

Pair with the Q0951 Inner Bush Set

If carrying out a complete front lower arm refresh, these Q0952 rear-position bushes can be combined with the corresponding:

Q0951 Front Lower Arm Inner Bush Set

Together, the two sets provide replacement uprated rubber bushes for both positions of the front lower control arms.

Installation

Lower control arm bushes are safety-critical suspension components and professional installation is recommended.

Removal and installation may require suitable pressing or specialist bush installation equipment.

During installation, inspect:

• Front Lower Control Arms
• Front / Inner Lower Arm Bushes
• Ball Joints
• Mounting Bolts
• Chassis / Subframe Mounting Points
• Bush Housings
• Anti-Roll Bar Components
• Surrounding Suspension Components

Any significant corrosion, cracking, deformation or damage should be addressed before the vehicle is returned to use.

Correct Bush Orientation

The bushes must be installed in the correct orientation where applicable.

Where the bush design requires final tightening with the suspension at its normal operating ride height, the appropriate procedure should be followed to avoid unnecessary preload in the rubber.

Wheel Alignment Recommended

Following lower control arm bush replacement, we recommend a professional wheel alignment.

Replacing worn bushes can alter the resting position of the suspension compared with the previous deteriorated components, so alignment should be checked before returning the vehicle to normal use.

Compatibility

Designed for applicable:

Nissan Micra K12 - Front Lower Arm Rear Bushes

Reference: Q0952 Lower Arm Bushing

Please confirm the suspension arrangement on imported, converted or unusually specified vehicles before ordering.

Manufacturer Warranty

This product is supplied subject to the applicable manufacturer's warranty terms and conditions.

Suspension bushes are service components and warranty does not normally cover normal wear, incorrect installation, contamination, accident damage, damaged control arms or mounting points, or use outside the intended application.

GizFab Motorsport Developments is an independent aftermarket retailer and is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd. Nissan and Micra names are used solely for vehicle identification and compatibility purposes.