Nissan Micra K11 Haltech IC-7 Dash Mount - 3D Print File

A downloadable 3D print file for mounting a Haltech IC-7 Display Dash in the Nissan Micra K11 dashboard.

This design was originally made possible by David Hopkinson, who has kindly given permission for the file to be uploaded and freely distributed for the K11 community.

We have made a few minor alterations to the original design, including the addition of a mounting hole for a remote USB port.

Please Note - This is a Digital File

You are purchasing/downloading the 3D print file only.

No physical dash mount, Haltech IC-7, USB port, hardware or other components will be supplied.

The file is intended for you to 3D print the mount yourself or have it printed for your own personal use.

Features

• Designed for the Nissan Micra K11
• Designed to Mount a Haltech IC-7 Display Dash
• Ready for 3D Printing
• Provision for a Remote USB Port
• Downloadable Digital File
• Freely Distributed with Permission from the Original Designer

Printing & Fitment

As this is supplied as a digital file rather than a finished physical product, the final quality, strength, dimensions and fitment will depend on factors including:

• Printer Accuracy & Calibration
• Printing Material
• Slicer Settings
• Print Orientation
• Layer Height
• Wall Thickness & Infill
• Material Shrinkage
• Individual Dashboard Condition

Some minor finishing or adjustment may therefore be required depending on your printer and vehicle.

For automotive interior use, consideration should also be given to the temperature resistance of the chosen printing material, particularly where the vehicle may be exposed to high interior temperatures.

Credit

The original design was made possible by David Hopkinson, with permission kindly given for us to upload and freely distribute the file.

Minor alterations have subsequently been made by GizFab Motorsport Developments, including provision for a remote USB port.

A big thank you to David for allowing the design to be shared with the wider K11 community.

⚠️ Non-Commercial Use Only

This file is provided strictly for personal, non-commercial use.

You may:

• Download the file for your own personal use.
• Modify the file for your own personal use.
• 3D print the component for your own vehicle.

You may not:

• Sell the digital file.
• Redistribute the file commercially.
• Manufacture and sell physical products produced from the file.
• Use the file, or a modified version of it, as part of a commercial product without permission.

Downloading the file does not transfer ownership of the underlying design or grant commercial manufacturing rights.

Digital Product Disclaimer

This file is supplied as a community resource for DIY 3D printing. GizFab Motorsport Developments cannot guarantee the quality, strength, dimensional accuracy or suitability of components produced using third-party printers, materials or printing services.

The installer remains responsible for confirming the suitability and security of the finished printed component before use.

Haltech and IC-7 are trademarks/product names of Haltech Engine Management Systems. Nissan and Micra are trademarks/product names of Nissan Motor Co., Ltd. GizFab Motorsport Developments is an independent aftermarket company and is not affiliated with, sponsored by, approved by or endorsed by Haltech or Nissan.