GIZMO Nissan Micra K11 Front Lower Lip - 1st Facelift

Complete the front end of your K11 with our GIZMO Front Lower Lip, a fibreglass reproduction-style lower spoiler designed specifically for the 1st Facelift Nissan Micra K11 front bumper.

Manufactured from fibreglass and supplied in a white gel coat finish, the lip is intended to be professionally prepared, trial-fitted and painted before final installation.

⚠️ 1ST FACELIFT K11 BUMPERS ONLY

This version is designed specifically for the 1st FACELIFT Nissan Micra K11 front bumper.

It is NOT suitable for Pre-Facelift or 2nd Facelift bumpers.

Please see our other listings for the appropriate versions for those bumper styles.

If your K11 has had a replacement bumper fitted during its lifetime, identify the actual bumper fitted to the vehicle rather than relying solely on its registration year.

Key Features

• GIZMO K11 Front Lower Lip
• 1st Facelift Bumpers Only
• Fibreglass / GRP Construction
• Supplied in White Gel Coat Only
• Designed to Follow the Profile of the Factory K11 Bumper
• Can be Bonded or Mechanically Fastened
• Supplied Unpainted
• Preparation Required Before Final Fitment
• 12-Month Warranty

Fibreglass / GRP Construction

The lip is manufactured from fibreglass reinforced plastic (GRP) using a moulded manufacturing process.

GRP is ideally suited to low-volume aftermarket body components, but some preparation should always be expected compared with an injection-moulded factory plastic component.

⚠️ MODERATE PREPARATION REQUIRED

These lips are supplied from the moulding process in white gel coat and will require preparation before final installation and painting.

Typical preparation will include:

• Removing Remaining Mould Release Wax
• Cleaning & Degreasing
• Sanding the Gel Coat Surface
• Removing Minor Surface Blemishes
• Trial Fitting to the Bumper
• Sanding/Finishing the Mating Faces
• Cutting the Opening for the Factory Tow Hook
• Minor Edge Finishing where required
• Primer Preparation
• Final Painting

The lip should be repeatedly trial-fitted during preparation to achieve the best possible fit against the individual bumper before final paintwork.

Factory Tow Hook Opening

The opening for the factory front tow hook is not supplied pre-cut.

This must be cut by the installer during preparation.

Leaving the opening uncut allows its final position to be accurately determined against the individual vehicle and bumper before material is removed.

Measure carefully and trial-fit before cutting.

⚠️ WHITE GEL COAT ONLY

These are available in WHITE GEL COAT ONLY.

The white surface is the manufacturing gel coat finish and should not be considered a finished automotive paint surface.

Preparation and painting will be required to achieve a finished appearance.

Please do not request alternative gel coat colours, painted finishes or colour-matched versions. These are supplied in white gel coat only.

Mounting Options

The lip can be installed using a number of methods depending on the installer's preference.

It can be:

Bonded to the bumper using a suitable automotive body adhesive

or

Mechanically secured using brackets, screws, rivets or similar suitable hardware.

A combination of adhesive and mechanical fastening can also be used where appropriate.

⚠️ MOUNTING HARDWARE NOT INCLUDED

Adhesive, brackets, screws, rivets and other mounting hardware are not supplied.

The installer is responsible for selecting an appropriate method of securely attaching the lip to the vehicle.

Professional Bodyshop Installation Recommended

For the best finished result, we recommend installation and preparation by somebody experienced with fibreglass/GRP automotive body components.

All:

• Trial Fitting
• Sanding
• Trimming
• Tow Hook Cutting
• Drilling
• Mounting Preparation

should be completed before the component receives its final paintwork.

Do not paint the lip immediately after delivery and assume no further preparation or adjustment will be required during installation.

Normal GRP Characteristics

Minor surface marks, mould lines, small pinholes or slight edge variations can occur as part of the normal GRP manufacturing process.

These are normally addressed during standard preparation before painting.

Minor preparation-correctable imperfections should therefore be expected with a low-volume fibreglass body component and do not necessarily constitute a manufacturing defect.

12-Month Warranty*

This product is warranted to the original purchaser against defects in materials and workmanship for a period of 12 months from purchase.

Our obligation under this warranty is limited to repair or replacement, at our discretion, where inspection confirms a manufacturing or material defect.

The warranty does not cover normal GRP surface imperfections that can be corrected during standard preparation, preparation or painting costs, incorrect fitment, insufficient preparation, incorrect tow-hook cutting, modification, damage caused during drilling or fastening, unsuitable adhesive, impact damage, kerb damage, road debris damage or incorrect installation.

Paintwork, bodyshop labour, preparation costs, adhesives and mounting hardware are not covered by the product warranty.

⚠️ IMPORTANT FITMENT REMINDER

1ST FACELIFT K11 FRONT BUMPER ONLY.

This product is NOT suitable for Pre-Facelift or 2nd Facelift K11 bumpers.

Please see our separate listings for the correct versions.

GIZMO is an independent aftermarket brand. This product is a modern aftermarket reproduction-style component and is not an original Nissan component. GizFab Motorsport Developments is not affiliated with, sponsored by, approved by or endorsed by Nissan Motor Co., Ltd.